+- Board 6 (http://board6.com)
+-- Forum: The Good Shit (http://board6.com/forumdisplay.php?fid=34)
+--- Forum: The Beat Down (http://board6.com/forumdisplay.php?fid=42)
+--- Thread: edge banding machine for doors manufacturers (/showthread.php?tid=12999)
edge banding machine for doors manufacturers - lili030 - 03-27-2019
This full automatic edge bander is used for making panel based furnitures.
The function of this machine is: pre-milling, gluing, end trimming, fine trimming, corner rounding scrapping and buffing. If you need to have slots one side of the board, we can install a grooving function to this machine.
Technical parameters:
ModelFZ-360DJ
Motor power15.6kw
Overall size7100×1100×1600mm
Feed speed12～20m/min
Panel thickness10～60mm
Edge banding tape thickness0.4～3mm
Panel width≥80mm
Working air pressure0.8MPa
Weight2800kgs
Trim equipment with double trim-blades works on the waved effect that is caused by precise dimerscien saw
The glue mechanism adopt a special structure to gelatinize the plates and coating materials uniformly, ensure a more solid conglutination.
Rough/Fine trimming mechanism used for repairing the excess edge materials, adopt automatic tracking and high-frequency motor fast cutting structure to esure this trimming plates smoothly.
End-trimming mechanism through a precise guide track movement, adopt automatic tracking and high-frequency motor fast cutting structure to ensure the cutting surface smoothly.
Scraping unit is used for a perfect finishing of the applied edge.
Pro-filling unit is to make board end smooth and aesthetic.
The buffing device adopt the board processed by cotton polishing wheel,by end-polishing to make a more smooth surface.edge banding machine for doors manufacturers
website:http://www.luhongmachinery.com/edge-banding-machine/